Wednesday, April 28, 2010
Lotus Engineering demonstrates the lightweight future of the passenger car
0 comments Posted by Dono at 1:55 AM
Lotus Engineering conducted two studies to look at the possibility of developing passenger vehicles from 2017. The specialised lightweight sports car maker says its long-time philosophy of weight reduction will benefit potential customers in the areas of fuel consumption and C02 emissions.
company engineers discovered that by improving the aerodynamics by 80 counts, the car netted a six mile per gallon improvement in its highway fuel economy rating (note: a "count" is a thousandth of a point of a Cd number, so reducing a Cd of 0.150 by 50 counts would give you a Cd of 0.100). On the flipside, taking out 400 pounds of stuff only improved the car's highway mpg by one mile a gallon, though that's largely because of the Newtonian "an object in motion tends to stay in motion unless acted upon by an outside force" hubbub.
The interior systems include 50% lighter seats, climate control hardware, navigation electronics and others. There is a high level of component integration for space maximisation and weight minimisation. An example is the audio/ air conditioning/navigation touch screen which also contains the shifter and parking brake functions. Chassis and suspension components are to be downsized, the glazing and width of the windscreen possibly reduced and replaced with an appropriate, lower weight substitute.
Press Release
- Study by Lotus Engineering concludes that a vehicle mass improvement
of 38% versus a conventional mainstream vehicle can be achieved at only
3% cost.
- Efficient design and lightweight materials significantly reduce CO2
emissions.
Lotus Engineering has conducted a study to develop a commercially viable
mass reduction strategy for mainstream passenger vehicles. This study,
released by the International Council on Clean Transportation, focused on
the use of lightweight materials and efficient design and demonstrated
substantial mass savings. When compared with a benchmark Toyota Venza
crossover utility vehicle, a 38% reduction in vehicle mass, excluding
powertrain, can be achieved for only a 3% increase in component costs using
engineering techniques and technologies viable for mainstream production
programmes by 2020. The 2020 vehicle architecture utilises a mix of stronger
and lighter weight materials, a high degree of component integration and
advanced joining and assembly methodologies.
Based on U.S. Department of Energy estimates, a total vehicle mass
reduction of 33% including powertrain, as demonstrated on the 2020 passenger
car model, results in a 23% reduction in fuel consumption. This study
highlights how automotive manufacturers can adopt the Lotus philosophy of
performance through light weight.
Dr Robert Hentschel, Director of Lotus Engineering said: "Lighter
vehicles are cleaner and more efficient. That philosophy has always been
core to Lotus' approach to vehicle engineering and is now more relevant than
ever. Lightweight Architectures and Efficient Performance are just two of
our core competencies and we are delighted to have completed this study with
input from the National Highway Traffic Safety Administration and the U.S.
Environmental Protection Agency to provide direction for future CO2
reductions. We believe that this approach will be commonplace in the
industry for the future design of vehicles."
The study investigated scenarios for two distinct vehicle architectures
appropriate for production in 2017 and 2020. The near-term scenario is based
on applying industry leading mass reducing technologies, improved materials
and component integration and would be assembled using existing facilities.
The mass reduction for this nearer term vehicle, excluding powertrain, is
21% with an estimated cost saving of 2%.
A benchmark Toyota Venza was disassembled, analysed and weighed to
develop a bill of materials and understand component masses. In developing
the two low mass concepts, Lotus Engineering employed a total vehicle mass
reduction strategy utilising efficient design, component integration,
materials selection, manufacturing and assembly. All key interior and
exterior dimensions and volumes were retained for both models and the
vehicles were packaged to accommodate key safety and structural dimensional
and quality targets. The new vehicles retain the vision, sight line, comfort
and occupant package of the benchmarked Toyota Venza.
Darren Somerset, Chief Executive Officer of Lotus Engineering
Incorporated, Lotus' North American engineering division which led the
study, said "A highly efficient total vehicle system level architecture was
achieved by developing well integrated sub-systems and components,
innovative use of materials and process and the application of advanced
analytical techniques. Lotus Engineering is at the forefront of the
automotive industry's drive for the reduction in CO2 and other greenhouse
gas emissions and this study showcases Lotus Engineering's expertise and
outlines a clear roadmap to cost effective mass efficient vehicle
technologies."
Mass and Cost Summary
Base excluding powertrain |
| ||||
|
(kg) | 2020 | 2017 | ||
% | % | % | % | ||
Body | 383 | 42% | 135% | 15% | 98% |
Closures/Fenders | 143 | 41% | 76% | 25% | 102% |
Bumpers | 18.0 | 11% | 103% | 11% | 103% |
Thermal | 9.25 | 0% | 100% | 0% | 100% |
Electrical | 23.6 | 36% | 96% | 29% | 95% |
Interior | 252 | 39% | 96% | 27% | 97% |
Lighting | 9.90 | 0% | 100% | 0% | 100% |
Suspension/Chassis | 379 | 43% | 95% | 26% | 100% |
Glazing | 43.7 | 0% | 100% | 0% | 100% |
Misc. | 30.1 | 24% | 99% | 24% | 99% |
Totals | 1290 | 38% | 103% | 21% | 98% |
The full report, entitled ‘An Assessment of Mass Reduction Opportunities for
a 2017 - 2020 Model Year Vehicle Program' can be found at the following
link:
http://www.theicct.org/documents/0000/1430/Mass_reduction_final_2010.pdf
ENDS
The 2020 Passenger Car Technical Detail
Body
The body includes the floor and underbody, dash panel assembly, front
structure, body sides and roof assembly. The baseline Toyota Venza
body-in-white contained over 400 parts and the revised 2020 model reduced
that part count to 211. The body-in-white materials used in the baseline
Venza were 100% steel, while the 2020 model used 37% aluminium, 30%
magnesium, 21% composites and 7% high strength steel. This reduces the
structure mass by 42% from 382 kg to 221 kg.
The low mass 2020 body-in-white would be constructed using a low energy
joining process proven on high speed trains; this process is already used on
some low volume automotive applications. This low energy, low heat friction
stir welding process would be used in combination with adhesive bonding, a
technique already proven on Lotus production sports cars. In this instance,
the robotically controlled welding and adhesive bonding process would be
combined with programmable robotic fixturing, a versatile process which can
be used to construct small and large vehicles using the same equipment.
Closures/Fenders
The closures include all hinged exterior elements, for example, the front
and rear doors and the rear liftgate. One alternative approach included
fixing the primary boot section to improve the structure, reduce masses and
limit exposure to high voltage systems. A lightweight access door was
provided for checking and replacing fluids.
The closures on the baseline Toyota Venza were made up of 100% steel. The
low mass Venza closures/fenders would be made up of 33% magnesium, 21%
plastic, 18% steel, 6% aluminium with the other 22% consisting of multiple
materials. The mass savings are 41%, a reduction from 143 kg to 84 kg.
Interior
The interior systems consist of the instrument panel, seats, soft and
hard trim, carpeting, climate control hardware, audio, navigation and
communication electronics, vehicle control elements and restraint systems.
There is a high level of component integration and electronic interfaces
replace mechanical controls on the low mass model. For the 2020 model the
instrument panel is eliminated replaced by driver and passenger side modules
containing all key functional and safety hardware. A low mass trim panel
made from a high quality aerated plastic closes out the two modules. The air
conditioning module is incorporated into the console eliminating the need
for close out trim panels; heated and cooled cupholders are integrated into
the HVA/C module. The audio/HVA/C/Navigation touch screen contains the
shifter and parking brake functions and interfaces with small electric
solenoids. This eliminates conventional steel parking brake and shifter
controls and cables as well as freeing up interior space.
The front seats mount to the structural sill and tunnel structure
eliminating conventional seat mounting brackets (10 kg) and the need to
locally reinforce the floorpan. The composite front seat structure utilises
proven foam technology; the seat mass is reduced by up to 50%. The rear seat
support structure is moulded into the composite floorpan eliminating the
need for a separate steel support structure. The front and rear seats use a
knit to shape fabric that eliminates material scrap and offers customers the
opportunity to order their favourite patterns for their new vehicle. Four
removable carpet modules replace the traditional full floor carpeting; this
reduces mass and allows cost effective upgrading of the carpet quality. The
floorpan is grained in all visible areas. The 2017 production interior mass
was reduced from 250 kg to 182 kg with projected cost savings of 3%. The
2020 production interior mass was 153 kg with projected cost savings of 4%.
Chassis/Suspension
The chassis and suspension system was composed of suspension support
cradles, control links, springs, shock absorbers, bushings, stabilizer bars
and links, steering knuckles, brakes, steering gearbox, bearings, hydraulic
systems, wheels, tires, jack and steering column.
The chassis and suspension components were downsized based on the revised
vehicle curb weight, maintaining the baseline carrying capacity and
incorporating the mass of the hybrid drive system.
The total vehicle curb weight reduction for the 2020 vehicle was 38%,
excluding the powertrain. Based on the gross vehicle weight, which includes
retaining the baseline cargo capacity of 549 kg and utilising a hybrid
powertrain, the chassis and the suspension components were reduced in mass
by 43%, with projected cost savings of 5%.
Front and Rear Bumpers
The materials used on the front and rear bumpers were very similar to the
existing model to maintain the current level of performance. One change was
to replace the front steel beam with an aluminium beam which reduced mass by
11%. The use of a magnesium beam was analysed but at the current time
exceeded the allowable price factor.
Heating, Ventilation and Air Conditioning
The air conditioning system was integrated into a passenger compartment
system and an engine compartment system. This section addressed the under
hood components which included the compressor, condenser and related
plumbing. The under hood components were investigated for technologies and
mass.
The study showed a relatively small mass difference for the underhood air
conditioning components based on both vehicle mass and interior volume.
Because of the highly evolved nature of these components, the requirements
for equivalent air conditioning performance and the lack of a clear
consensus for a future automotive refrigerant, the mass and cost of the
Toyota Venza compressor, condenser and associated plumbing were left
unchanged for both the 2017 and 2020 models.
Glazing
The glazing of the baseline vehicle was classified into two groups: fixed
and moving. The fixed glass is bonded into position using industry standard
adhesives and was classified into two sub groups: wiped and non wiped.
Factors involved in making decisions about glazing materials include the
level of abrasion it is likely to see during the vehicle life, the
legislative requirements for light transmissibility, the legislative
requirements for passenger retention and the contribution it will make to
interior noise abatement.
The specific gravity of glass is 2.6 and the thickness of a windshield is
usually between 4.5 mm and 5 mm, therefore the mass per square metre of 5 mm
glass is approximately 13 kgs. The high mass of glass provides a strong
incentive to reduce the glazed area of the body, reduce the thickness of the
glass and find a suitable substitute that is lighter. Fixed glass on the
side of the vehicle offers the best opportunity for mass reduction.
The mass of the baseline glazing was retained for both the 2017 and 2020
models; this was a conservative approach. It is possible that coated
polycarbonate materials may become mainstream in the 2017 - 2020 timeframe
for fixed applications.
Electrical/Lighting
The estimated mass savings for using thinwall cladding and copper clad
aluminium wiring, as used on the 2017 model was 36% versus the baseline
model. The lighting technologies section reviewed included diodes, xenon and
halogen. The study also reviewed a variety of wireless technologies under
development for non-transportation applications that could be used in this
time period pending successful development for mobile applications.
Labels: European, Lotus, Technology
Saturday, February 20, 2010
Bidding Commences! Three Evoras Were Auctioned at The Fashion For Relief TM Event, With The First Two Reaching Over GBP 300,000 Each!
The discerning fashion show audience at the Fashion For Relief TM show last night made their feelings clear about the design of the “Naomi for Haiti” Lotus Evora with the bidding reaching an incredible GBP 320,000. The winning bid came from Naomi Campbell’s boyfriend, Vladimir Doronin, who wanted to ensure that he got the first car, number one of eight.
Bidding on the remaining five “Naomi for Haiti” Lotus Evoras started at 0800 GMT today on the www.naomiforhaiti.com website. There are only 9 days to register a bid for these highly desirable "Naomi for Haiti" Lotus Evoras as the auction will end at 1200 noon GMT on the 28th of February 2010.
The grand total raised for the Fashion For Relief TM charity and the highest bidders will be announced by Naomi Campbell at the Lotus press conference on the 2nd of March at the Geneva Motorshow.
Naomi made a stylish entrance in one of the “Naomi for Haiti” Lotus Evoras, with a further fifteen Lotus Evora sports cars being used to provide a VIP chauffeur service for the celebrities that supported the Fashion For Relief TM show. The Fashion For Relief TM charity supporters included; Yasmin Le Bon, Kate Moss, Geri Halliwell, Piers Morgan, Sarah Brown, Eva Hertzigova and Andrew Flintoff.
Naomi Campbell said: "I am incredibly grateful to everyone who has generously donated their time and effort to make Fashion For Relief TM happen. I’m thrilled with the support from Lotus and to have teamed up with my great friend Gino Rosato for this important cause. I hope we continue to raise as much awareness and funds as we can.”
Gino Rosato, Director of Corporate Affairs at Lotus Cars stated, “I am very proud to welcome my good friend Naomi into the Lotus family. We are delighted to be able to work together to raise money for such a worthy cause. The Fashion For Relief TM event has proven to be exceptionally successful and it is fantastic to be able to help the nation of Haiti.”
The special “Naomi for Haiti” Lotus Evora sports car that Naomi arrived in was on display at Somerset House during the Fashion For Relief TM show. The exclusive styling reflects Naomi’s design direction and has been specially designed by Donato Coco, Lotus Director of Design. The bespoke "Naomi for Haiti" Evoras include a full range of options which combined with the custom design and special components make these cars an instant collectors item.
Naomi's Fashion For Relief TM event selected to support the White Ribbon Alliance as it campaigns for the health needs and rights of women and girls around the world, especially supporting its partners in Haiti at this time to rebuild the healthcare system for mothers and babies.
More Photos
Tuesday, February 16, 2010
The new Lotus Elise probably has the lowest CO2 for its performance for any gasoline high performance sportscar in the world
The Lotus Elise revolutionised the sportscar market 14 years ago when the small lightweight agile 2-seat mid engine sportscar was introduced. By ensuring that the Elise stuck rigidly to Lotus' core values of performance through light weight, the Elise was able to produce supercar performance with city car economy.
Making its debut at the 80th International Geneva Motorshow, the 2011 model year Lotus Elise introduces a number of changes and improvements to maintain its class leading position.
For the 2011 model year, the Elise range will consist of the following variants:
- Lotus Elise - 136 PS, less than 155 g of CO2 /km - new 1.6 litre engine *
- Lotus Elise R - 192 PS, 196 g of CO2 /km - 1.8 litre engine
- Lotus Elise SC - 220 PS, 199 g of CO2 /km - 1.8 litre supercharged engine
Key changes and improvements to the whole of the 2011 model year Elise range
- New evolution body design incorporating new front clamshell, rear bumper and engine cover
- New all in one integrated headlights including LED day light running lights and LED direction indicators
- Improved aerodynamics with a reduction in Cd by 4%, resulting in better fuel economy
- New cast and forged wheels
- Vehicle warranty increased from 2 years to 3 years and 36, 000 miles
Additional changes for the 2011 model year entry level Lotus Elise
- New high technology 1ZR-FAE 1.6 litre engine with Valvematic and Dual VVT-I technology to optimise the performance and efficiency of the engine
- Less than 155 g of CO2 per km (an improvement of over 13% compared to the 2010 Elise S)*
- Combined fuel consumption 6.14 litres / 100 km (46 mpg)*
- New 6 speed close ratio gearbox
- Cruise control available as part of the Touring pack
The body - an evolution
The new 2011 model year Elise range is on sale now and will be in showrooms from April 2010. The body of the new 2011 model year Elise is an evolution of the iconic Elise design, retaining the character and style, while offering a more planted, purposeful stance and a pure, contemporary look that links it to the Evora. As with all Lotus product the design is an exciting blend of dramatic style and functional efficiency
The new Elise body has a fresh sculptured front, including a new bumper, front clam and access panel that combine to give the Elise a wider look with more road presence.
At the rear of the car the new engine has been encased by a distinctive "twin-spine" engine cover whilst lower down a more aggressive diffuser is tightly wrapped by an elegant new bumper design that now includes the rear licence plate.
New headlamp units with distinctively sculptured LED lighting guides (incorporating daytime running lamps and direction indicators) give a contemporary twist to this classic design. Elsewhere, the signature, Lotus "mouth" and familiar sculptured forms have been sensitively refined to give a crisper, more dynamic look. The repositioning of lamp functions has enabled the creation of broad clean surface between the fenders which combines with sleek corner intakes and prominent splitter detail to give a broader more planted stance.
The theme of purity is carried through to the cooling apertures that are efficiently finished with a new lightweight aluminium mesh that gives the car a classically sporting character.
The rear boot is now opened from the cockpit rather than via a separate key operation. The high quality feel of the Elise is continued throughout the car with the Elise graphic incorporated into the new side LED direction indicators, like those on the Evora.
The driving position, from the perfectly positioned pedals and steering wheel, to the comfortable and supportive seats with ProBax** technology means that, like all Lotus cars, the driver becomes part of the car rather than being just a passenger.
With the sleek new body the aerodynamics have improved giving a reduction in the coefficient of drag of 4%.
Finally, a choice of two beautiful, light weight wheel designs are available; an incredibly light forged wheel and a new cast wheel completes the picture for this sensitive update of a Lotus Icon.
Additional changes to the 2011 model year Lotus Elise
The new 2011 model year Elise has a number of additional changes and improvements, with the installation of a new advanced 1.6 litre Valvematic engine meeting EURO 5 regulations. This new engine is 200cc smaller than the outgoing Elise S model and produces similar power (136 PS, 100 kW, 134 hp at 6800 rpm) with maximum torque of 160 Nm, 118 lbft at 4400 rpm, but offers a significant improvement to fuel economy of over 23%, to 6.14 litres / 100km (46 mpg)* and a reduction in CO2 emission by more than 13%*. This provides the new Lotus Elise with the lowest CO2 per performance for any gasoline high performance sportscar in the world. This high technology engine is mated to a new 6-speed manual gearbox, providing closer and more performance orientated ratios than the outgoing 5 speed box.
The 1.6 litre engine is controlled via the bespoke Lotus T6 engine management system. Cruise control is available on the Elise for the first time with the controls present on a stalk located to the left of the steering column.
New cast wheels have been designed specifically for the Elise and the new optional forged wheels weigh just 29.26 kg per set, 2.14 kg lighter than a set of lightweight cast versions. Both are available in silver or black colour.
Dany Bahar, Chief Executive of Group Lotus said, "The Lotus Elise revolutionised the sportscar when it was launched 14 years ago and now the Lotus Elise has become greener, giving drivers access to class leading performance with less guilt."
Donato Coco, Director of Design said, "The Elise is an iconic sportscar and it was important that we did not complicate its design, so we made the car more pure in its look, improved the aerodynamics, and gave it a more contemporary look with high quality detailing."
Paul Newsome, Director of Lotus Product Engineering said, "We are always looking at ways of keeping the Elise ahead of its peers and for the 2011 model year we have improved efficiency without losing the innate fun that has made the Elise legendary."
Andreas Prillmann, Chief Commercial Officer for Lotus Cars said, "In its 14 years of production the Elise has accounted for 32% of all the 61 years of Lotus production, illustrating how significant to the brand and well loved it is. The 2011 model year Elise is greener, purer and more desirable, making it even more relevant to today's marketplace. The new Elise underlines Lotus' reputation as one of the most innovative sports car manufacturers in the world."
Performance
Lotus Elise
0 - 60 mph 6.0 seconds*
0 - 100 km/h 6.7 seconds*
Maximum speed 200 km/h (124 mph)*
Lotus Elise R
0 - 60 mph 5.1 seconds
0 - 100 km/h 5.4 seconds
Maximum speed 222 km/h (138 mph)
Lotus Elise SC
0 - 60 mph 4.3 seconds
0 - 100 km/h 4.6 seconds
Maximum speed 233 km/h (145 mph)
The 2011 model year Elise in more detail.
The Elise - the entry model
Engine
The Lotus Elise introduces the new 1598 cm3, 1ZR-FAE engine, provided by Toyota. The key to this engine's performance and efficiency is the Valvematic system (a variable valve lift mechanism), which is combined with the dual VVT-i (Variable Valve Timing-intelligent). The engine continuously controls intake valve opening/closing timing and the intake valve lift to vary the volume of the intake airflow, giving significant improvements in efficiency and fuel economy. This ensures optimal performance based on the engines operational condition, thus helping the Elise achieve both high fuel efficiency and high performance.
First of all, the maximum power output is achieved at near maximum revs (engine speed) of 6800 rpm and maximum torque (a respectable 160 Nm, 118 lb.ft) is reached at 4400 rpm. This gives a good combination of mid range pull but also encourages the driver to rev the engine to the maximum permitted engine speed of 7000 rpm (transient rev limit). Like all Elise sportscars, there are three shift up lights, on the binnacle cumulatively lighting when the driver is getting closer to the rev limiter and when all three are illuminated, they flash to indicate that the driver is almost on the rev limiter so time to change up a gear!
The height of the engine cover has been raised by 34mm to accommodate the taller 1ZR engine compared to the previous 1ZZ engine from the outgoing model due, in part, to the additional Valvematic technology included on the new engine. This has given Lotus engineers an opportunity to subtly redesign the rear engine cover to match the design theme from the front and rear of the car.
Chassis
The Lotus Elise is built around the revolutionary and award winning extruded and bonded aluminium chassis, with a lightweight steel rear subframe. The chassis weighs 68 kg (150 lbs) and has a stiffness of 9,800 Nm per degree, giving a high level of control of the suspension. At the rear, and also acting as a rear energy absorbing crash structure, a lightweight steel subframe carries the engine and gearbox. At the front, the radiator and key ancillaries are mounted into a high tech composite energy absorbing crash structure that is both lightweight, compact and over three times more energy absorbing than the equivalent steel structure.
Ride and handling
The legendary Lotus ride and handling gives a superb high performance, sporty drive, combined with a compliant ride and progressive on limit handling, it makes the Elise a car that demands to be driven. The entry level Lotus Elise weighs 876 kg, making it one of the lightest fully homologated sportscars in the world. This low weight translates into efficient performance with minimal environmental impact in terms of emissions and fuel consumption. The efficiency of the Elise structure means that the 136 PS (100 kW, 134 hp) delivers phenomenal performance. Few cars can match the delicacy and accuracy of the steering, throttle and brakes of the Elise and all of these factors contribute to the excellent driving experience of the Elise.
Safety
The Elise has high performance AP Racing callipers at the front and Brembo callipers at the rear linked to 282 mm vented and cross-drilled cast iron discs to give excellent stopping power. The Elise comes as standard with a track tuned ABS system that is designed to be unobtrusive under normal driving conditions. This system is designed to be used on track and has a high threshold, only intervening in emergencies. The ABS system is linked to a lightweight pedal box with steel pedal arms and extruded aluminium pads. This unit also has an electronic (drive-by-wire) throttle for quick, smooth and more linear engine response. The impressive braking coupled with excellent handling gives good primary safety and the composite front crash structure and rear crash protection offers efficient secondary safety. Driver and passenger airbags and pre-tensioning seatbelt are standard on all Elise models.
Prices will be announced in March 2010.
*The Lotus Elise is currently undergoing EC Whole Vehicle Type Approval and official fuel consumption and CO2 emissions figures, plus performance figures are not yet available. The official figures for fuel consumption and CO2 emissions and performance will be published on Group Lotus plc's web site as soon as they become available (www.grouplotus.com) or may be obtained from the PR Department, Lotus Cars Limited, Potash Lane, Hethel, Norfolk, NR14 8EZ, UK.
**"ProBaxTM" seats
Introduced for 2006 Model Year Lotus Exige and Elise cars, ProBaxTM seats are designed by Lotus and specifically adapted and developed by NuBax. ProBaxTM seats help to significantly improve the postural position of the occupant's spine whilst seated compared to similar seat shells without ProBax technology. This not only results in an improved level of comfort, but also has significant medical benefits - maintaining a natural curvature of the spine, and markedly improving the body's blood flow. Increased blood flow has been shown to enhance response times, raise alertness levels and reduce the onset of muscle fatigue. Tests on Lotus seats, with the new ProBaxTM technology, have shown an improvement in blood flow of up to thirty per cent over the pre-2006 Model Year Lotus seat.
More Photos
Labels: European, Facelifts, Geneva Motor Show, Lotus
Saturday, February 13, 2010
Supermodel Naomi Campbell and sports car manufacturer Lotus Cars join forces for Haiti
0 comments Posted by Dono at 9:08 PMIn response to the horrific natural disaster that has crippled the nation of Haiti, Naomi Campbell together with Lotus Cars will be auctioning eight special edition "Naomi for Haiti" Lotus Evora sports cars, with the proceeds from the auction going to help the relief effort in Haiti.
The Lotus Evora is a very desirable, multi-award winning, high performance, mid-engined sports car that presents a fantastic piece of design to bid on. The “Naomi for Haiti” Evora sports car has been specially designed by Lotus Design Director Donato Coco and reflects Naomi’s design direction. The bespoke styling combines the flag of Haiti with a dramatic colour scheme and the cars include a full range of options, meaning these cars will all become desirable collectors items.
The “Naomi for Haiti” Evoras will be auctioned at Naomi Campbell's Fashion for Relief TM charity fashion show on the 18th of February at the London Fashion Week venue at Somerset House. The remaining “Naomi for Haiti” Evoras will be entered into an auction run on the “Naomi for Haiti” website www.naomiforhaiti.com and bidding will commence at 0800 GMT on the 19th of February and will end at 1200 noon GMT on 28th of February 2010.
The grand total raised for the charity and the highest bidders will be announced by Naomi Campbell at the Geneva Motorshow on the 2nd of March. There will also be a link to the “Naomi for Haiti” website from the Lotus Cars website http://www.grouplotus.com/cars/home.html.
The Fashion For Relief TM event has selected to support the White Ribbon Alliance as it campaigns for the health needs and rights of women and girls around the world, especially supporting its partners in Haiti at this time to rebuild the healthcare system for mothers and babies.
Naomi Campbell says, "I am deeply saddened by the recent tragedy in Haiti. So many have been killed and severely affected by the earthquake - women and children in particular are most vulnerable in disasters. Fashion is universal, personal and touches everyone. I am delighted that Lotus Cars is supporting my Fashion for Relief TM charity and I am sure with such generous help we will raise crucial funds to help save the lives of women and children."
Dany Bahar, CEO of Group Lotus Plc, stated, "It is a very admirable cause and we are proud to be supporting Naomi Campbell with her Fashion For Relief TM event in aid of the women and children affected by the terrible disaster in Haiti. The whole of Lotus is supporting this very deserving charity, with many working in their own time in order to raise money for the women and children affected by the earthquake in Haiti."
The Red Cross has said that the earthquake in Haiti has affected approximately 3 million people and it is reported that upwards of 200,000 people have died in the disaster. The magnitude of the earthquake combined with the local geography and house building techniques has exacerbated the destruction.
Ends Notes
Fashion For Relief TM Set up four years ago to demonstrate the kind of contributions the fashion community can make, the first Fashion For Relief TM show was held in 2005 in New York City during their fashion week, and raised more than $1 million dollars for the Hurricane Katrina relief. In 2007 the event, held in London, raised an amazing GBP 1million for the Rotary Flood & Disaster Appeal.
In 2008, Naomi teamed up with Sarah Brown for the first time to host an unforgettable Fashion For Relief TM raising thousands for The White Ribbon Alliance and raising awareness of the charity. Last year Fashion For Relief TM travelled to Mumbai, India and Dar Es Salaam, Tanzania.
Past participants and supporters include: Beyonce, Boy George, Cheryl Cole, Cilla Black, Christian Slater, Claudia Schiffer, Erin O'Connor, Faye Dunaway, Iman, Jamelia, Jessica Stam, Kate Moss, Yasmin Le Bon, Ronan Keating, Kelly Osbourne, Lily Cole, P. Diddy, Princess Beatrice, Rio Ferdinand, The Duchess of York, Joaquin Cortes, Tyson Beckford and many more.
Haiti is the poorest country in the western hemisphere - where 37,000 pregnant women now face birth in dangerous, unsanitary conditions - White Ribbon Alliance's partner organisation International Planned Parenthood Federation (IPPF) is currently struggling to meet the overwhelming need for basic healthcare services. IPPF’s clinics, which are based in the communities most affected by the earthquake, have been severely damaged. Despite this, they are operating a number of health clinics from tents, with additional mobile bus clinics from the Dominican Republic into Haiti. Such is the huge need that they are desperately short of staff, medical supplies and diesel fuel. In crisis situations, women and children’s health needs and physical safety are at much greater risk; we need your help to address the short term needs and the long term consequences.
About Lotus
The main operating subsidiary of Group Lotus plc is Lotus Cars Ltd, which has two operating divisions - Lotus Engineering and Lotus Cars. Lotus Engineering is an internationally recognised automotive engineering consultancy based in Norfolk, UK. Global facilities include those in Michigan (USA), Kuala Lumpur (Malaysia), China and offices in Germany and Japan, with rapid expansion in new territories such as South East Asia.
Lotus Engineering provides comprehensive and versatile consultancy services to many of the world's OEMs and Tier 1 suppliers, offering a full engineering service from initial concept and project design through development and integration of the complete vehicle to meet all worldwide markets and customers to full production. This includes third party 'niche vehicle' engineering and manufacture worldwide.
Lotus Cars builds world class, prestige, high performance sports cars for sale in 37 countries. These include the iconic Lotus Elise, the Exige, the 2-Eleven and Lotus’ latest model, the Lotus Evora. Lotus is a global high-tech company, expanding rapidly and committed to driving forward technology for both Lotus Cars and its Engineering clients, spearheading research into such areas as hybrids, electric vehicles and renewable fuels.
For more information about Lotus please contact:
PR Department; Group Lotus plc,
Potash Lane, Hethel, Norfolk, UK, NR14 8EZ
Tel: +44(0)1953 608264;
Email: pr@lotuscars.co.uk
Gallery>>
Labels: Lotus
Wednesday, December 9, 2009
The premium quality, South African designed and built Millennium 7 sports car is to be made available to more enthusiasts in the future. This will follow a decision by the main driver of the project, Chris Carstens, to put it on more of a business footing than has been the situation up to now, where production has been very limited and all the cars have vastly different specifications.
The Millennium 7 is yet another take on the original Lotus 7, designed and built by the legendary Colin Chapman in England in 1957. This relatively simple, but highly effective design is probably the most copied car of all time.
Records show that more than 90 companies around the world have built variations on the Lotus 7 theme. Several companies and individuals in South Africa have been involved in these projects over the years, with varying degrees of success; a high point is the fact that many locally-made Lotus 7 replicas have found their way to foreign countries as exports.
This Millennium 7 project is the result of a number of people in the SA aircraft industry living their dream by producing a purpose-built two-seater sports car on a Brentwood Park smallholding, north of Kempton Park. Aeronautical engineer Chris Carstens and his long-time friend, Kobus van der Walt, of SAA Technical, both of Kempton Park, are the driving forces behind this project, which has been under development for the past six years.
Chris, who heads up Safair Technical, has been involved in building aircraft, sports cars and even a trike over the years and the Millennium 7 was the result of a request by Kobus to design and build him a special sports car and they hit on the idea of building a Lotus 7 replica for the 21st century.
Chris and Kobus then attracted seven like-minded people from the aeronautical world to join their team, which is housed in a novel, metal aircraft hanger "tunnel" factory on the smallholding. Interest in the car is so high that Chris is already planning to erect a second, conventional factory alongside it to handle increased production.
South African-born Alastair Gibson, formerly the chief mechanic at Honda F1, is a personal friend of Chris and Kobus and has been an enthusiastic supporter of the project, as well as providing valuable input in the design and build.
Automotive service providers in the Kempton Park area are also involved in the Millennium 7 project, providing skills such as spray painting, machining, laser cutting of metal panels and exhaust fabrication.
So far about 20 cars have been built or are in the process of being built.
There is already sereious interest from Australia and a sample car is being sent there for homologation by the authorities. This could lead to exports to other lucrative markets, such as the United Kingdom and Japan, in the future.
The Millennium 7 uses a complex space frame of CR12 cold rolled square tubing covered by aluminium stressed skin panels to increase stiffness. Bodywork, which is made by DAW, is of glass fibre and weighs less than 40kg. The cockpit is far larger than the original Lotus 7 to accommodate the larger build of South Africans.
A complete car with a four-cylinder Toyota engine weighs in the region of 700kg, assuring stunning performance without the need for a very powerful engine.
One area where the Millennium 7 differs from most other Lotus 7 replicas is in the rake of the windscreen, with it having a much steeper rake at 55 degrees and the screen itself is mounted in beautifully made carbon fibre A-posts.
An unusual feature of the car, which has been designed and engineered by Chris, are the partially enclosed front wheel fenders that are inspired by aircraft wheel covers - called "pants" in aero speak - and the "hub caps" on current F1 cars. The support strut still has to have a big hole cut in it and a carbon fibre scoop fitted to duct in cooling air. These fenders are among the more obvious of the many aerodynamic features integral with the design, which has evolved considerably over the years.
Front and rear suspension is independent by means of wishbones and shock absorbers with coil springs. No anti-roll bars are fitted. The Millennium 7 team even makes its own shock absorbers. The front wishbones are cast chrome moly and the rear ones are fabricated from tubing. All welding is to aircraft standards and the aeronautical background of the team members ensures very high quality for all elements that make up the car.
The Millennium 7 can be supplied as a do-it-yourself kit at a target price of about R150 000, while the aim is to provide a limited number of ready-to-drive cars to a customer's specification in the foreseeable future.
The kit will include the frame, alloy double skin panelling, bodywork, front and rear suspension, fuel tank, brakes, brake tubing, pedal box and master cylinders, steering system and a basic wiring harness. To these must be added: engine, gearbox, differential, drive shafts, radiator, steering wheel, instrumentation, wheels and tyres.
Many makes and types of engine can be fitted to the Millennium 7, although Toyota and Ford power units are the most popular - some having superchargers or turbochargers. One enthusiast fitted one of the early model cars with a turbocharged Mazda RX8 rotary engine. It is a real flyer!
A variety of gearboxes have been fitted, but all the cars use the rear differential from the E30 BMW 3-series, with its drive shafts.
The front and rear disc brakes come from the same BMW source but now the local ATE team has shown enthusiasm for the project and is making up custom, aluminium four-pot front callipers for the front and a special set up for the rear.
Chris Carstens has also had an approach from supercar enthusiast, Jose de Campos, of African Hoe, who is interested in making forgings for the front wishbones instead of the current method of casting them in chrome moly.
Chris and his team is now looking at restructuring the company so there can be a dedicated operation for making up the kits and assembling cars to a fairly standard specification.
A number of new, 2-litre Ford Focus Duratec engines have been obtained, with the intention of using them in a so-called "standard car" paired with a Ford Type 9 gearbox. These units have the advantage of affordable spare parts that are readily available, with plenty of scope for modifying them for higher performance.
There would then be a special area where cars or kits would be made to suit other makes of power train and for builds with special requirements, as well as an R&D facility. The intention is to have the new business model finalised early in the New Year
The show car that was displayed at the Zwartkops circuit in December is fitted with a modified 1600 20-valve Toyota engine matched to a Toyota T50 gearbox.
Engine management is by GoTech, with a Stack digital display to show speed, distance, revs, temperatures, pressures and the like. Steering wheel is a Sparco with quick-release system. Seats are Cobra, specially widened to fit the broader torso of a South African. .
Seat belts are from Schroth, while the wheels - 17 inch for the road and 15 inch for the track - are from Compomotive in Italy. Tyres are Dunlop. All these high-tech items were supplied by ATS Motor Sport Supplies, in Roodepoort.
The show car can also be changed quickly into a track day car with the fitting of a bolt-on chrome-moly roll cage and 15" lightweight Compomotives shod with Dunlop semi-slicks. A special luggage boot lid is fitted to clear one of the roll cage tubes.
"We are delighted at the response to our invitation for motor enthusiasts to come and view the latest version of the Millennium 7 and are looking forward to this becoming another iconic local sports car brand," commented Chris Carstens.
ENQUIRIES TO:
Roger Houghton
e-mail: houghtonr[at]mwebbiz.co.za
More Photos
Labels: Lotus, Specialty Marques
Thursday, December 3, 2009
Photos of a Lotus mule dressed in Exige clothing have surfaced. The car's appearance has sparked new rumours about what exactly it could be. Some believe the mule is being used to test a new powertrain for the upcoming Esprit. Reports have said the new Esprit will be powered either by a BMW or a Toyota-sourced V8. The Evora's 3.5-litre V6 from Toyota has also been touted as a possibility. The Esprit would appear on the streets by 2011.
href="http://www.worldcarfans.com/109120223338/mystery-lotus-mule-hides-new-eliseexige-or-esprit">more detail. ...
Labels: European, Lotus, Spy Photos